Filter
Top Products
38
3.4.23 Lighting the tally lamps
1. Connect the remote controller to the REMOTE connector.
2. Press the Remote Control TALLY (G) switch or Remote Control TALLY (R)
switch to select the lamp to ON or OFF.
3.4.24 Selecting the tally display method
1. ress the MENU switch.
2. Turn the adjustment dial to select OTHERS , and press the ENT switch.
3. Turn the adjustment dial to select Tally Type , and press the ENT switch to
select Upper or Frame.
3.4.25 Selecting the channels to be displayed by the audio level meter
1. Press the MENU switch.
2. Turn the adjustment dial to select OTHERS or AUDIO LEVEL METER ,
and press the ENT switch.
3. Turn the adjustment dial to select Audio CH , and press the ENT switch to
select channels 1 to 8 or channels 9 to 16.
The tally lamps (green and red) can be set to ON or OFF only using the
remote controller.
(Refer to “2.2 DM-3106 rear panel view and parts.”)
NOTE
The procedure for operating the tally lamps involves selecting the level.
Operation is performed regardless of whether the REMOTE switch is ON or
OFF.
CAUTION
A
t the “Upper” setting, the audio level meter and channel IDs are displayed
at the top of the screen; at the “Frame” setting, the screen is given a border.
NOTE