Filter
Top Products
Chapter 4 MAIN SPECIFICATIONS
71
4.9.2 Setting items by channel
The following items are set separately for the SDI A, SDI B, VBS and COMPONENT signals.
These settings are initiated either by “Channel Reset” or “Factory Default.”
Initial value Setting item Setting/adjustment range
SDI A SDI B VBS COMPOSITE
Channel ID SDI A SDI B VBS COMPONENT
Format All 15 types Auto Auto Auto Auto
Brightness -50.0 to +50.0% 0.0% 0.0% 0.0% 0.0%
Contrast 0.0 to 200.0% 100.0% 100.0% 100.0% 100.0%
Pb(Cb) 0.0 to 200.0% 100.0% 100.0% 100.0% 100.0%
Pr(Cr) 0.0 to 200.0% 100.0% 100.0% 100.0% 100.0%
Hue -179.0 to 180.0° 0.0° 0.0° 0.0° 0.0°
Peaking Level 0 to 100 0 0 0 0
Peaking ON/OFF ON ON ON ON
Filter ON/OFF ON ON ON ON
Mono ON/OFF OFF OFF OFF OFF
Blue Only ON/OFF OFF OFF OFF OFF
Green ON/OFF ON ON ON ON
Blue ON/OFF ON ON ON ON
Red ON/OFF ON ON ON ON
Color Space YPbPr/GBR YPbPr YPbPr YPbPr YPbPr
H Delay ON/OFF OFF OFF OFF OFF
V Delay ON/OFF OFF OFF OFF OFF
Volume 0 to 255 128 128 N/A N/A
L_CH 1 to 16CH 1CH 1CH N/A N/A
R_CH 1 to 16CH 2CH 2CH N/A N/A
Chroma Up ON/OFF OFF OFF OFF OFF
4.9.3 Resetting the error count and elapsed time
The following status values are initialized by “Error Reset.”
They are not initiated either by “Channel Reset” or “Factory Default.”
Status Initial value Remarks
Audio Err 0000000
CRC,EDH 0000000
Last 00:00:00 Audio error, and CRC, EDH elapsed time
* Subtitles and Time are not initialized.