Filter
Top Products
Chapter 4 MAIN SPECIFICATIONS
67
4.8 Concerning the remote controllers
4.8.1 Examples of operations
Concerning the edge operation
The function is reversed when it is detected that the control signals have been set from the high to
low level during the edge operation.
Example: SDI_A/SDI_B
Concerning the level operation
Settings are allocated to the control signal low and high levels for the level operation.
Example: SDI_A/SDI_B
SDI_A is allocated to high and SDI_B to low so the operation will be as shown below.
SDI_A SDI_B SDI_A
The function is reversed at this instant.
SDI_A SDI_B SDI_A
The function is reversed at this instant.