Filter
Top Products
30
3.4.7 Displaying the markers
1. Press the MENU switch.
2. Turn the adjustment dial to select OTHERS , and press the ENT switch.
3. Turn the adjustment dial to select Marker , and press the ENT switch to set
the markers to ON or OFF.
3.4.8 Selecting the markers to be displayed
1. Press the MENU switch.
2. Turn the adjustment dial to select MARKER SETTING , and press the ENT
switch.
3. Turn the adjustment dial to select Select Marker , and press the ENT switch.
4. Turn the adjustment dial to select the markers to be displayed, and press the
ENT switch to enter the marker selection.
SW R.C.
Markers can be selected to be superimposed onto each other.
The names of the currently selected markers are highlighted.
<Types of markers>
FRAME, CENTER, 95%, 93%, 88%, 80%, 4:3, 13:9, 14:9, 2.35:1, 1.85:1, 1.66:1,
Grating, Box, User
The table below shows the correlation between the selected format, aspect ratio and
markers which are displayed.
1080, 720 format 1035 format SD
ASPECT
RATIO
MARKER
NAME
(1) (2) (3) (4) (5) (1) (2) (3) (4) (5) (1) (2) (3) (4) (5)
Frame
Center
95%
93%
88%
80%
4:3
13:9
14:9
2.35:1
1.85:1
1.66:1
Grating
Box
User
*
1:
Asp
ect ratios:
(1) 4:3 (2) 16:9 (3) Actual Size (4)
Blanking
(5)
Under Scan
(6)
Twice Size
NOTE
If AUTO is selected as the format and no signals are input, the markers for
the 1080 format will be displayed.
CAUTION