Filter
Top Products
12. Accessories
Barco - LC series - R5976934 - user's manual - Revision 08 - April 2008
______________________________________________________________________________________
12-1
12 Accessories
The monitor can be equipped with a table stand, or mounted to the wall or the ceiling. The following chapter
describes assembling and installation of the accessories.
12.1 Required tools
• Screwdriver for recessed head screws (screw size M8)
Wall mount and ceiling mount:
• Wrench 10mm, 17mm, 19mm
• Allen wrench size 2.5 to adjust the tilt angle of the long/short ceiling mount
• Drilling machine to drill the holes into concrete
• 4 fixation screws per wall mount / ceiling mount
• 1 additional (center) fixation screw for the tiltable wall mount
• 4 (5) dowels (concrete)
The manufacturer of the accessories gives the following recommendation:
Specification of screws for wood: DIN 571 M8x80 4.6
Specification of screws for concrete DIN 16168 M8x75