Filter
Top Products
3. Design and function
3-2
___________________________________________________________
Barco - LC series - R5976934 - user's manual - Revision 08 - April 2008
3.1 Display of choice
The state-of-the-art monitors deliver crisp, clear images detailed to perfection. Compatible with a wide variety of
signal sources, they are capable of showing analog video as well as data content.
Sources and interfaces
The monitor provides interfaces to connect composite video, S-Video, component video as well as analog or digi-
tal RGB.
Picture-in-Picture
Two of the connected sources can be displayed simultaneously, either next to each other (PAP: picture-and-
picture), or one source embedded in the other (PIP: picture in picture).
The sources can be controlled individually (brightness, contrast, color)
Automatic brightness adjustment
A light sensor determines the surrounding light intensity. According the measurement, the panel will adjust to
one of the two preset brightness levels: bright mode or dim mode.
User friendliness
The monitors can intuitively be operated and controlled via the OSD and the Infra Red Remote Control Unit (IR
RCU).
The language of the OSD can be selected as well as its position on the screen, size, etc.
RS232 remote control is also possible.
In case you want to operate the monitor via RS232 Remote Control, contact Barco about
the protocol!