Filter
Top Products
5. The On Screen Display (OSD)
5-2
___________________________________________________________
Barco - LC series - R5976934 - user's manual - Revision 08 - April 2008
5.1 General
The monitors feature an OSD which allows selecting the input, to adjust the sources, to modify OSD settings, etc.
When activating the OSD, the main menu is displayed.
Except for the function keys and the direct access keys, it is always the main menu which
is the entry level for any modification.
The main menu is activated by pressing ADJ on the RCU or by pressing push button 7 (the bottom most push
button the right rear side).
A selected menu item shows a blue background, an unselected menu item a gray background.
A selected menu entry looks like a button and it is indicated with a blue dot.
The current status of the menu entry shows a blue background.
If a value has been modified, it will definitely be applied when quitting the dialog (even
when pressing EXIT!)
Therefore it is recommended to write down the values: there is no UNDO to a single
operation, only the global factory reset.
Grayed out menus or items are not available with the current configuration.