Filter
Top Products
1. Preliminary Remarks
1-6
___________________________________________________________
Barco - LC series - R5976934 - user's manual - Revision 08 - April 2008
Protection against scratch.
Please be careful not to hit, press or rub the screen surface with hard material like tools. In addition, please do
not put heavy or hard material on the screen surface, and do not stack monitors. Polarizer at the front surface
can be easily scratched.
Temperature dependence of the display.
Response speed (optical response) of the LCD display is dependent on temperature. Under low temperature,
response speed is slower. Also brightness and chromaticity change slightly depend on temperature.
Image retention
Displaying the same pattern for a long time may cause image sticking, vertical dark lines or other forms of image
artifacts. This is a common phenomenon of all LCD displays. It disappears after some time if the pattern is
changed, or the monitor is switched off. However, image retention is not subject of warranty.
For more information contact Barco for a white paper on this topic.
Lightning conditions
Consider existing lightning and sunlight angles when creating the installation layout. Extremely bright lightning
can reduce the visibility and the quality of the displayed image.
In extremely bright surroundings, adjusting screen intensity may not result in perceptibly brighter images. Keep
in mind that extreme intensity settings can reduce system service life.
Barco products are designed and manufactured to meet the most stringent safety regulations. Exposing flamma-
ble or combustible materials into close proximity of this device could result in the spontaneous ignition of that
material, resulting in a fire. For this reason, it is absolutely necessary to leave an "exclusion zone" around all
external surfaces of the monitor whereby no flammable or combustible materials are present. The exclusion zone
must be not less than 10 cm (4"). Do not cover the monitor with any material while it is in operation.
Keep flammable and combustible materials away from the monitor at all times. Mount the monitor in a well
ventilated area away from sources of ignition and out of direct sun light. Never expose this product to rain or
excessive moisture. In the event of fire, use sand, CO
2
, or dry powder fire extinguishers; never use water on an
electrical fire.
Always have service performed on this product by authorized Barco service personnel. Always insist on genuine
Barco replacement parts. Never use non-Barco replacement parts as they may degrade the safety of this device.
Use only the power cord supplied with your device. While appearing to be similar, other power cords have not
been safety tested at the factory and may not be used to power the display. For a replacement power cord, con-
tact your dealer.
Slots and openings in the cabinet and the sides are provided for ventilation; to ensure reliable operation of the
device and to protect it from overheating, these openings must not be blocked or covered. This product should
never be placed near or over a radiator or heat register. This product should not be placed in a built-in installa-
tion or enclosure unless proper ventilation is provided.