Filter
Top Products
5. The On Screen Display (OSD)
Barco - LC series - R5976934 - user's manual - Revision 08 - April 2008
______________________________________________________________________________________
5-25
Film Mode Detect
Film Mode Detect can be selected to be on or off.
Film is usually recorded at 24 frames per second. When converting film to NTSC video (59.94 Hz field rate), 2 film
frames generate 5 video fields (3:2 pull down). Film scenes with high-speed motion objects thus may show mo-
tion artifacts.
With Film Mode Detect on, the conversion to NTSC is detected and the original film frames are recreated by
blending the fields back together.
(3:2 pull down is only one of the pull down techniques and used as an example)
RCU Push button (1: top most)
• Use the up and down cursor keys to navigate to
the Film Mode Detect
• Press 5 and 6 to navigate to Film Mode Detect
• Use the left and right cursor keys to select one
of the options Off, On
The current selection is visualized by a white
caption.
• Use 3 and 4 to select one of the options Off, On
The current selection is visualized by a white cap-
tion.
The selection is applied without any further action.
This function may cause undesired effects on standard sources, therefore it can be disabled
(OFF) at any time.
Sharpness
Sharpness can be set in the range from -15 to +29
The edges are localized and the contrast between neighboring pixels enhanced.
RCU Push button (1: top most)
• Use the up and down cursor keys to navigate to
the Sharpness
• Press 5 and 6 to navigate to Sharpness
• Use the left and right cursor keys to in-
crease/decrease the value in steps of 1
The current value is indicated.
• Use 3 and 4 to increase/decrease the value in
steps of 1
The current value is indicated.
The value is applied without any further action.