Filter
Top Products
4. Controlling
Barco - LC series - R5976934 - user's manual - Revision 08 - April 2008
________________________________________________________________________________________
4-5
4.3 Functions available with the IR Remote Control Unit
4.3.1 Displaying a monitor address
The default (factory) address of a monitor is 1.
Via the OSD, every monitor can be assigned a unique address in the range of 1 and 255, cf. 5.6.1 Set display
address
With the IR remote control unit, all monitors with any address can be controlled.
With RS232 remote control, the monitors can be controlled individually if they had received a unique display
address. (This address can be displayed by means of the function key F5 on the IR remote control unit).
Press F5 on the IR remote control unit to display the assigned address of the monitor.
4.3.2 Baud rate setting
The default baud rate for RS232 communication is 115200 baud. The baud rate can be set in the OSD, cf.
5.6.2 Baud rate.
With the PAUSE key on the IR RCU the baud rate can directly be set to 115200, 38400, 19200, or 9600, respec-
tively. Press PAUSE to display the currently set baud rate. Press PAUSE again to switch the baud rate to the next
lower setting. In case the baud rate is 9600, the next setting will be 115200.