Filter
Top Products
1. Preliminary Remarks
Barco - LC series - R5976934 - user's manual - Revision 08 - April 2008
________________________________________________________________________________________
1-9
1.3.7 Modification of devices
Mechanical or electrical modifications others than described in this manual must not be made to the devices.
Barco is not liable for damages resulting from modified devices.
Only authorized personnel should carry out other maintenance work not explicitly men-
tioned in this user's manual!
Never open the case of the monitor without first disconnecting the power supply cord!
Measurements and tests with an opened device may be carried out only in the factory or
by specially trained personnel, due to the dangers of electrical shock.
1.3.8 Disposal or handing over to a new owner
• It is recommended to initialize the unit by resetting it to factory's default, cf. 5.7.1 Factory Reset.
• Do not mix with other general waste.
• Do not dispose the LCD monitor in waste treated by a waste treatment center.
The lamp contains mercury inside. Please follow the regulations or rules established by
local autorithies at its disposal..
1.3.9 Exemptions
• This monitor is not liable for any damage caused by natural disaster (such as earthquake, thunder, etc.),
fires, acts by third parties, accidents, owner’s intentional misuse and fault, or uses in other improper condi-
tions.
• This monitor is not liable for incidental damages (such as profit loss or interruption in business, modification
or erasure of record data, etc.) caused by use or inability to use of this product.
• This monitor is not liable for any damage caused by neglect of the instructions described in the owner’s
manual.
• This monitor is not liable for any damage caused by misuse or malfunction through simultaneous use of this
product and the connected equipment or software.
• This monitor is not liable for any damage caused by neglect of the instructions described about the installa-
tion stand in the owner’s manual.
• This monitor is not liable for any damage caused by improper installation.