Filter
Top Products
5. The On Screen Display (OSD)
Barco - LC series - R5976934 - user's manual - Revision 08 - April 2008
______________________________________________________________________________________
5-35
5.6 Display parameter setting menu
On the Display parameter setting menu, setting of display address, baud rate, light sensor, lower brightness
level, ambient light threshold & auto source selection can be done.
To activate the Display parameter setting menu, proceed as follows:
RCU Icon Push button (1: top most)
• Press the ADJ key to activate the OSD
• Press 7 to activate the OSD
• Use the cursor keys to navigate to the
Display parameter setting menu
• Press 3 and 4 to navigate to the
Display parameter setting menu
• The icon will turn blue, and the setting
dialog will pop up
• The icon will turn blue, and the set-
ting dialog will pop up