Filter
Top Products
Garmin GPSMAP 695/696 Owner’s Manual
190-00919-00 Rev. F
163
Hazard Avoidance
Overview GPS Navigation Flight Planning Hazard Avoidance Additional Features Appendices Index
FLIGHT ID DISPLAY AND GROUND TRACK
The Flight IDs of other aircraft (when available) can be enabled for display on the
Traffic Page. When a flight ID is received, it will appear above or below the corresponding
traffic symbol on the Traffic Page when this option is enabled. Traffic ground track is
indicated on the GPSMAP 695/696 display by a “target track vector,” a short line
shown in 45-degree increments, extending in the direction of target movement.
Enabling/Disabling Flight ID Display:
On
the Traffic Page, press the
FLT ID
Softkey.
Aircraft
Identification (tail
number or Flight
ID number)
Example ADS-B Traffic Symbol
Intruder Aircraft
Ground Track
Relative Altitude (in
this case 500 feet
above own aircraft)
Altitude Trend (up
arrow indicates
climbing, down
arrow indicates
descending)
Changing the altitude range:
1)
On the Traffic Page, select the
ALT MODE
Softkey.
2)
Press one of the following Softkeys:
•
ABOVE: Displays non-threat and proximity traffic from 9000 feet
above the aircraft to 2700 feet below the aircraft. Typically used during
climb phase of flight.
•
NORMAL: Displays non-threat and proximity traffic from 2700 feet
above the aircraft to 2700 feet below the aircraft. Typically used during
enroute phase of flight.
•
BELOW: Displays non-threat and proximity traffic from 2700 feet
above the aircraft to 9000 feet below the aircraft. Typically used during
descent phase of flight.
•
UNREST (unrestricted): All traffic is displayed.
3)
To return to the Traffic Page, press the BACK Softkey.