Filter
Top Products
Garmin GPSMAP 695/696 Owner’s Manual
190-00919-00 Rev. F
4
Overview
OverviewGPS NavigationFlight PlanningHazard AvoidanceAdditional FeaturesAppendicesIndex
If you do not want to use the unit, but you would like to charge the battery, you can
put the unit into Charge Mode. Connect the unit to an external power supply. Press
and hold the POWER Button. Instead of completely turning off, the unit now goes
into Charge Mode.
TURNING THE UNIT ON/OFF
Press and hold the POWER Button to turn the unit on or off.
NOTE: If the display appears dark or dim, adjust the display backlighting as
necessary upon power up. The GPSMAP 695/696 retains the backlighting
settings between power cycles. Backlighting may have been set to a level
not suitable for the current ambient lighting. For more information on display
backlighting see section 1.4 (System Settings).
The power button can be used to quickly set the backlight intensity. A momentary
press of the power button (after the unit is powered on) will display a window showing
the current backlight setting. From this window the backlight setting can be adjusted
with the joystick knob, or a second momentary press of the power button changes the
backlight level to full bright (10).
Adjusting Backlighting on Power up
The first time the unit is turned on, the receiver must collect satellite data and
establish its present location. To ensure proper initialization, the GPSMAP 695/696 is
shipped from the factory in AutoLocate mode, which allows the receiver to “find itself”
anywhere in the world.