Filter
Top Products
Garmin GPSMAP 695/696 Owner’s Manual
190-00919-00 Rev. F
78
GPS Navigation
OverviewGPS NavigationFlight PlanningHazard AvoidanceAdditional FeaturesAppendicesIndex
Direct-to destinations may also be selected by using the pointer on the navigation
map pages. If no airport, NAVAID, or user waypoint exists at the desired location, a
temporary waypoint named 'MAP POINTER' is automatically created at the location of
the map arrow.
Selecting a waypoint as a direct-to destination using the pointer:
1)
From a navigation map page, press the FMS Joystick to display the pointer.
2)
Move the FMS Joystick to place the pointer at the desired destination
location.
3)
If the pointer is placed on an existing airport, NAVAID, or user waypoint, the
waypoint name is highlighted.
4)
Press the Direct-to Key to display the Direct-to Window with the selected
point entered as the direct-to destination.
5)
Press the ENT Key.
6)
With ‘Activate’ highlighted, press the ENT Key.
Cancelling a direct-to:
1)
Press the Direct-to Key to display the Direct-to Window.
2)
Move the FMS Joystick to highlight 'Stop Navigation' or ‘Resume Flight
Plan’ if a flight plan was active.
3)
Press the ENT Key. If a flight plan is still active, the GPSMAP 695/696
resumes navigating the flight plan along the closest leg.