Filter
Top Products
Editing Programs: Chapter 6
QuadraSynth Plus Piano Reference Manual 118
0
100
POINTS: 0 1 2 3 4 5 6 7 8 9 10
LINEAR
0
100
POINTS: 0 1 2 3 4 5 6 7 8 9 10
NON-LINEAR
0
100
POINTS: 0 1 2 3 4 5 6 7 8 9 10
NON-LINEAR STEPPED
Tip: The Tracking Generator can be used to turn a variable control, such
as the Mod Wheel or velocity, into a switch by setting all of the points to
0 except for point 10. Only near the maximum input will anything other
than 0 come out of the Tracking generator. You can patch the Mod Wheel
somewhere else in addition to the Tracking Generator, giving you
gradual control of one function with the full range of the Mod Wheel,
while switching on a second function only at the top of the wheel.
However, the Tracking Generator interpolates between steps; this is sort
of like playing “connect the dots.” In other words, the Tracking
Generator does not step directly from one point to the next, but ramps
from point to point.
Input
In Page 1 of the TRACK function, Quad Knob [1] selects the
input of the Tracking Generator:
• Note Number • Velocity • Release
Velocity
• Aftertouch • Poly Pressure • Mod
Wheel
• Pitch Wheel • MIDI Volume • Sustain
Pedal
• Pedal 1 • Pedal 2 • PLFO
• FLFO • ALFO • PENV
• FENV • AENV • Random
• Trig Rate • Cont. A—D