Filter
Top Products
Overview: Chapter 4
QuadraSynth Plus Piano Reference Manual 52
Copying Effects Between Programs
Follow the steps below to copy the Effects from one Program to another
Program in the User Bank.
¿ Press [PROGRAM] to select Program Play Mode.
¡ Use the VALUE [¬] and [] buttons to select the Program
Number that uses the Effects you want to copy. If necessary, use the
FUNCTION [♦] and [∅] buttons to select a different Bank.
¬ Press [STORE].
Press PAGE [∅] once to advance to Page 2.
The top right section of the display will read “COPY TO SOUND 1”.
ƒ Turn Quad Knob [1] clockwise until the display reads “COPY
FROM EFFECT”.
This selects the Effects of the currently selected Program as the source of what is
to be copied.
H Turn Quad Knob [2] to select the Program Number in the User
Bank you wish to copy the Effects to (000–127).
Press [STORE] to complete the copy function.
Store an Effect
If you have edited a Program’s Effect and would like to store it without
storing the changes you’ve made to the Program’s parameters, you can
use the Copy Effect function to store only the Effects edits to the
currently selected Program. When you recall this Program, it will have
the new Effects settings you saved it with, but will retain its previously
stored Program parameter settings.
Store a Mix
¿ While in either Mix Play Mode or Mix Edit mode, after making
your edits press the [STORE] button.
¡ Select the memory Bank and location to which you want to store
the Mix using Quad Knob [1] and [2]. respectively.
If no RAM Card is inserted, you will only be able to select the User Bank.
J
Do not use the DIRECT SELECT [1]—[0] buttons. Doing so will result in
recalling a different Mix and you will lose your changes.
¬ Press [STORE] again to complete the operation.
J