Filter
Top Products
Editing Mixes: Chapter 5
QuadraSynth Plus Piano Reference Manual 61
Program Assign for each MIDI Channel
The first function of Mix Edit is Program Assign.
Program Bank (User, Preset 1–4, Card)
This determines which Bank the selected Program is located in
for the selected MIDI channel. There are five Banks available in
the QuadraSynth Plus. If you insert a QuadraCard Sound Card,
you can have even more Banks.
Program Number (000 to 127)
This determines the Program Number (000—127) for the selected
MIDI channel.
Enable (On or Off)
This determines whether the Program on the selected channel is
enabled or disabled. When disabled, no sound will be generated
by the QuadraSynth Plus. The Channel number in the display
for a disabled channel will not appear except when selected for
editing.
J
Even if a channel is enabled here, it will not play unless the proper
settings in the RANGE function (MIDI IN and/or KEYBOARD
On/Off and LOW/HIGH) are made.
Level Setting for Each Program
The second function of Mix Edit is Level.
Level (00 to 99)
This sets the overall volume for a sound. Higher numbers give
higher levels.
Pan (<3 to 3>, or PG )
This determines the pan position of the selected channel. When
set to PG, the panning setting will be that of the Program
assigned to the selected channel. However, you can override this
setting by selecting a different value, thereby assigning the
channel’s panning between the left and right outputs of either
the MAIN or AUX outputs (depending on the Output
assignment--see below).
Output (MAIN, AUX, OFF, or PROG)
This determines the audio output assignment for the selected
channel. When set to PROG, the channel will use the Output
assignment of the Program. However, you can override this
assignment by setting this parameter to something different.
Selecting MAIN or AUX will assign the channel to the MAIN or