Filter
Top Products
Editing Effects: Chapter 7
QuadraSynth Plus Piano Reference Manual 158
Pitch (Page 2)
If the Pitch type is Mono Chorus, Stereo Chorus, Mono Flange or Stereo
Flange, page 2 of the Pitch function contain the following four
parameters:
Waveform Shape
Quad Knob [1] determines the LFO’s waveform shape. This
parameter only appears when the Mono or Stereo Chorus or
Flange are selected. The Waveform Shape of the LFO can be
changed from a sine waveform, which provides a smoother,
more even sound, to a square or triangle waveform, which
makes the Chorus or flange effect more pronounced.
Speed
Quad Knob [2] is used to adjust the LFO Speed of all Pitch types,
with the exception of Pitch Detune and Resonator.
Depth
Quad Knob [3] is used to adjust the LFO Depth of all Pitch types,
with the exception of Pitch Detune and Resonator. The LFO
Depth, which is the amount of pitch alteration, can be adjusted
to produce the desired effect.
Feedback
Quad Knob [4] is used to adjust the LFO Feedback of all Pitch
types, with the exception of Pitch Detune and Resonator. A
portion of the output of the Pitch section can be “fed back” into
the input in order to make the effect more tonal or pronounced.
Detune
If the Pitch type is Pitch Detune, page 2 will have only this
parameter. Use Quad Knob [1] to adjust the tuning of the Pitch
Detune effect.
Resonator Tuning and Decay
If the Pitch type is Resonator, page 2 of the Pitch function will
have two parameters. Use Quad Knob [1] to adjust the Resonator
tuning, and Quad Knob [3] to adjust the Resonator Decay.