Filter
Top Products
Overview: Chapter 4
QuadraSynth Plus Piano Reference Manual 50
Storing
The [STORE] button selects Store mode. Store mode has 6 pages which you can
scroll through by using the PAGE [♦] and [∅] buttons. Each page in Store mode
provides a different type of storage, copy or data transfer function. When storing
edited Mixes, or Programs into the User Bank or a RAM Card Bank, you will use
the first page of Store mode (for more information about the other pages of Store
mode, see Chapter 9). If you press [STORE] while in Mix Play Mode, the display
will look like this:
MIDI
CHAN
MIXMIX PROG
1 2 3 4 5 6 7 8 9 10 1 1 12 13 14 15 16
EFFECTEFFECT
PRESET
EDITED
PRESET PRESET
P AGE: 1 2 3 4 5 6
Once you have edited a Mix, a Program, or an Effect, the word “EDITED” will
appear in the display. If this word appears next to the Mix Number, the Mix has
been edited; if it appears next to the Program Number, the Program has been
edited; if it appears next to the Effect Number, the Effect has been edited.
Each edit mode type requires its own store operation. For example, if while
making a new Mix you also make changes within one of the Programs (such as
lowering the filter level), you must use the Store command separately (from Mix
Edit, and Program Edit or Effect Edit) in order to save your work. Note: When
using the Store command from Effect Edit Mode, the associated Program is
stored. This is because Effects are stored within their respective Programs.
If you select a different Mix while in Mix Edit mode, or a different Program in
Program Edit mode, you will lose all changes you have made, unless you
perform a store first.
J
You can only store Mixes, Programs, and Effects into their respective User banks. The
Preset banks are permanently stored in ROM and cannot be saved over.
Store a Program
¿ While in either Program Play Mode or Program Edit mode, after
making your edits press the [STORE] button.
¡ Select the memory Bank and location to which you want to store
the Program using Quad Knobs [1] and [2]. respectively.
If no RAM Card is inserted, you will only be able to select the User Bank.
J
Don’t use the DIRECT SELECT [1]—[0] buttons. Doing so will result in
recalling a different Program and you will lose your changes.