Filter
Top Products
Editing Effects: Chapter 7
QuadraSynth Plus Piano Reference Manual 142
Configuration #5: OD>CHS>DDL>REV>LZ
AUX LEFT
AUX RIGHT
MAIN LEFT
MAIN RIGHT
1
BAL.
FX SEND 1
MISC. 1
1
PITCH 1 REVERB 1
MIX
OVERDRIVE
FX SEND 2
FX SEND 3
FX SEND 4
PITCH 1
BAL.
1
DELA Y 1
BAL.
1
2
AMP
REVERB 1
1
BAL.
1
2
LEZLIE
DELAY 1
1
PITCH 1
MISC. 1
Pitch 1 Delay 1Reverb 1 Misc. 1
Mono chorus Mono delay Plate 1 Overdrive
Mono flange Stereo delay Plate 2 -------------
Resonator Ping-Pong delay Room EQ
------------------ Hall
Lezlie Large
Gate
Reverse
This is an “all-for-one” Configuration. You get six effects all at once, and
they are all found in the Send 1 section, but other sends may be used to
access particular parts of the chain. Send 1 feeds the Overdrive effect
which provides classic distortion. The Overdrive output then feeds the
Pitch effect. The Pitch effect has a second input which can come from
either Sends 1, 2, 3 or 4 . These two inputs can be mixed together.
The Delay effect has two inputs which can be mixed together. The first
input comes from the Pitch effect’s output. The second input can come
from either Sends 1, 2, 3 or 4 , or the Overdrive effect’s output, or Pitch
effects input.
The Reverb effect has two inputs which can be mixed together. The first
input can come from the Pitch effect’s output or the Delay effect’s
output. The second input can come from either Sends 1, 2, 3 or 4 , or the
Overdrive effect’s output, or the Delay effect’s input.
The Lezlie effect (found in the Pitch Function, Page 4) has two inputs
which can be mixed together. The first input can come from the Delay
effect’s output or the Reverb effect’s output. The second input can come
from either Sends 1, 2, 3 or 4 , or the Overdrive effect’s output, or the
Pitch effect’s input or output, or the Delay effect’s input, or the Reverb
effect’s input.
The outputs of all these effects are routed back to the Main Outputs, and
sent through the shelving EQ effect (found in the Misc. Function, Page 4).