Filter
Top Products
101
Set up speakers
14
Use ui to select a channel, and then press ENTER.
Front
/
Subwoofer
/
Surround Back
/
Front Height
/
Front Wide
15
Use o p to select a front speaker, and then press
ENTER.
A Select this to use front speaker A.
B
Select this to use front speaker B.
A+B
Select this to use front speakers A and B simultaneously.
16
Use o p to set whether or not a subwoofer channel is
measured, and then press ENTER.
Measure
(2 spkrs)
Set for measuring two subwoofers (Audyssey Sub EQ
HT™).
Measure
(1 spkr)
Set for measuring a subwoofer.
Skip
Set for no measuring of a subwoofer.
17
Use o p to set whether or not a surround back
channel is measured, and then press ENTER.
Measure
(2 spkrs)
Set for measuring two surround back speakers.
Measure
(1 spkr)
Set for measuring a surround back speaker.
Skip
Set for no measuring of a surround back speaker.
18
Use o p to set whether or not a front height channel
is measured, and then press ENTER.
Measure Set to measure the front height speakers.
Skip
Set when you do not want to measure the front height
speakers.
19
Use o p to set whether or not a front wide channel is
measured, and then press ENTER.
Measure Set to measure the front wide speakers.
Skip
Set when you do not want to measure the front wide
speakers.
20
Press o or BACK.
Proceed to page35
Preparation
step 5.
NOTE
After performing Audyssey
®
Setup, do not change the speaker
connections or subwoofer volume. In event of a change, perform
Audyssey
®
Setup again.
13
Set up “Channel Select”
Use ui to select “Channel Select”, and then press
ENTER.
Channel Select
Subwoofer
Surround Back
Front Height
Measure(1spkr)
Measure(2spkrs)
Measure
Audyssey Setup
Channel Select
Amp Assign
Check Results
Restore...
Start
Your AV receiver can automatically measure the acoustics of
your room then optimize your speakers using the included
microphone.
Set the following items
if necessary.
Basic version
Advanced version
Informations
Advanced version
DVD