Filter
Top Products
152
Zone Rename
Change the display title of each zone to one you prefer.
Setting details
MAIN ZONE / ZONE2 / ZONE3 / ZONE4
•Up to 10 characters can be input.
•For character input, see page118.
Set Defaults : The input source name is returned to the default setting.
•Reset : Reset to the defaults.
•Cancel : Do not reset to the defaults.
If you select “Set Defaults” and press ENTER, the message “Reset to the
default values?” is displayed. Select “Reset” or “Cancel”, and then press
ENTER.
Quick Select Names
Change the “Quick Select” display title to one you prefer.
Setting details
Quick Select 1 / Quick Select 2 / Quick Select 3 / Quick Select 4
•Up to 16 characters can be input.
•For character input, see page118.
Set Defaults : The input source name is returned to the default setting.
•Reset : Reset to the defaults.
•Cancel : Do not reset to the defaults.
If you select “Set Defaults” and press ENTER, the message “Reset to the
default values?” is displayed. Select “Reset” or “Cancel”, and then press
ENTER.
Remote ID
Set when you operate another DENON AV amplifier with the remote control unit of this unit.
Match the remote control unit you are using with the remote ID of this unit.
Setting details
n How to set the remote ID
1. Press ZONE SELECT to switch the zone mode.
The J indicator lights.
2. Press SETUP.
The menu is displayed on the TV screen.
3. Use ui to select “General” then press ENTER.
4. Use ui to select “Remote ID” then press ENTER.
5. Change the ID for the remote control unit(vpage167).
6. Press ENTER.
The Remote ID for this unit is set to the same ID as the one for the remote
control unit.
Trigger Out 1 / Trigger Out 2
Selects when to activate trigger out.
For details about how to connect the TRIGGER OUT jacks, see “TRIGGER OUT jacks” (vpage30).
Setting details
n When setting for zone (MAIN ZONE / ZONE2 / ZONE3 / ZONE4)
Trigger out is activated through linkage to the power of the zone set to “On”.
n When setting for input source
Activate trigger out when the input source set to “On” is selected.
Active for the zone set to “On” with “When setting for zone”.
n When setting for HDMI monitor
Activate trigger out when the HDMI monitor set to “On” is selected.
Activate trigger out when the HDMI monitor set to “On” is selected. Active when the “MAIN
ZONE” set to “On” with “When setting for zone” is selected, and when the input source set to
“On” with “When setting for input source” is selected.
•On : Activate trigger on this mode.
•– – – : Do not activate trigger on this mode.
General
Basic version
Advanced version
Informations
Advanced version
DVD