Filter
Top Products
107
REC OUT mode
•When using the audio/video recording connectors (MEDIA PLAYER
outputs), you can record the audio or video from a different program
source while listening to the currently played track.
•For the connection method, see “Connecting a media player”
(vpage22).
1
Press ZONE/REC SELECT until “RECOUT Source”
is displayed.
2
Press ZONE/REC SELECT to choose the input source
to be recorded.
ZONE2 Source ZONE2 CBL/SAT ZONE2 DVD
····
····
RECOUT DVD RECOUT CBL/SAT RECOUT Source
3
Start recording.
•For operating instructions, refer to the respective device’s
operating instructions.
•To cancel, press ZONE/REC SELECT until
“ZONE2 Source” is displayed.
•Make a test recording before starting the
actual recording.
•Sources selected with the REC OUT mode
are output from ZONE2 as well.
•The operable buttons on the remote control
unit in REC OUT mode while it is in the
operating mode for ZONE2 are as follows:
•ZONE SELECT button
•MUTE button (:)
•VOLUME button (df)
NOTE
•Recordings you make are for your personal enjoyment and should
not be used for other purposes without permission of the copyright
holder.
•Input sources for which “Hide” is selected at “Hide Sources”
(vpage137) cannot be selected.
•To record video signals through this unit, use the video cable for
connection between this unit and the player.
•Make an analog connection for audio signals.
Basic version
Advanced version
Informations
Advanced version
DVD