96
Speaker connection
Multi-channel + 2-channel connection
You can connect the other front speakers for 2-channel playback using
the DIRECT mode or STEREO mode.
The speakers used exclusively for multichannel playback and the speakers
used exclusively for 2-channel playback are automatically switched for
playback in accordance with the surround mode.
In this case, set “Assign Mode” to “9.1ch/2ch Front” in steps 3 to 5 for
“Set up “Amp Assign”” (vpage99).
Front speakers can be used separately, depending on the speaker’s
specifications or playback source such as front speakers (FL/FR) for
multichannel playback and front speakers (FL’/FR’) for 2-channel playback
(vpage145 “Front Speaker”).
NOTE
•For speaker cable connections, see page93.
•For speaker impedance , see page93.
Multi channel playback
(Surround mode)
2-channel playback
(Direct/Stereo mode)
Switching
FLFL’
FR
FR’
C
SL
SR
SW
FHRFHL
SBL SBR
When using a front wide speaker, you can connect a second front speaker to the connectors on the part in the connection
diagram. To make connections for these connectors, set “Main Speakers” (vpage100).
Basic version
Advanced version
Informations
Advanced version
DVD