Filter
Top Products
177
Relationship between the Amp Assign mode settings and audio output
On this unit, you can change how the power amplifiers within this unit are used according to your environment.
This allows you to output audio to rooms other than the room where the surround is played back (MAIN ZONE) and to enjoy high-quality playback from the front speaker in MAIN ZONE.
•Set the Amp Assign mode by referring to “Assign Mode” (vpage141).
•For speaker connection, see “Speaker connection” (vpage93).
NOTE
When making a bi-amplifier connection, use speakers that support the bi-amplifier connection. In this case, remove the short-circuit plate or short-circuit wire from the speaker connector.
n When “9.1ch(SB/FH/FW)” is selected for “Assign Mode”
Assigns all power amplifiers within this unit for MAIN ZONE. Up to 9.1ch playback is available.
Speaker terminal
FL FR C SL SR SBL SBR FHL FHR FWL FWR
Output signal FL FR C SL SR SBL SBR FHL FHR FWL FWR
Pre out terminal
FL FR C SL SR SBL SBR FHL FHR FWL FWR SW1 SW2 Z2L Z2R Z3L Z3R
Output signal FL FR C SL SR SBL SBR FHL FHR FWL FWR SW1 SW2 Z2L Z2R Z3L Z3R
Audio is output from the optimum speakers based on the selected sound mode.
Basic version
Advanced version
InformationsInformations
v See overleaf
DVD