Filter
Top Products
181
n When “7.1ch/2ch Front(Bi-Amp)” is selected for “Assign Mode”
Assigns power amplifiers within this unit as follows: 7.1ch for the MAIN ZONE multi-channel playback. You can also use a front speaker that is different from the one used during multi-channel playback for playback
under the bi-amplifier connection by switching the internal power amplifier during 2ch playback.
Speaker terminal
FL FR C SL SR SBL SBR FHL FHR FWL FWR
Output signal FL FR C SL SR SBL SBR
FL (Bi-amp)
for 2ch
FR (Bi-amp)
for 2ch
FL (Bi-amp)
for 2ch
FR (Bi-amp)
for 2ch
Pre out terminal
FL FR C SL SR SBL SBR FHL FHR FWL FWR SW1 SW2 Z2L Z2R Z3L Z3R
Output signal FL FR C SL SR SBL SBR – – – – SW1 SW2 Z2L Z2R Z3L Z3R
n When “7.1ch + Front B” is selected for “Assign Mode”
Assigns power amplifiers within this unit as follows: 7.1ch for MAIN ZONE and 2ch for the second front speaker connection.
Select the desired speakers used for MAIN ZONE from the “Main Speakers” settings.
Speaker terminal
FL FR C SL SR SBL SBR FHL FHR FWL FWR
Output signal
Main Speakers
S.Back/F.Height FL A FR A C SL SR SBL SBR FHL FHR FL B FR B
S.Back/F.Wide FL A FR A C SL SR SBL SBR FL B FR B FWL FWR
F.Height/F.Wide FL A FR A C SL SR FL B FR B FHL FHR FWL FWR
Pre out terminal
FL FR C SL SR SBL SBR FHL FHR FWL FWR SW1 SW2 Z2L Z2R Z3L Z3R
Output signal
Main Speakers
S.Back/F.Height FL FR C SL SR SBL SBR FHL FHR – – SW1 SW2 Z2L Z2R Z3L Z3R
S.Back/F.Wide FL FR C SL SR SBL SBR – – FWL FWR SW1 SW2 Z2L Z2R Z3L Z3R
F.Height/F.Wide FL FR C SL SR – – FHL FHR FWL FWR SW1 SW2 Z2L Z2R Z3L Z3R
Audio is output from the optimum speakers based on the selected sound mode.
Relationship between the Amp Assign mode settings and audio output
Basic version
Advanced version
InformationsInformations
v See overleaf
DVD