Filter
Top Products
153
Auto Standby
Default settings are underlined.
When you do not perform any operation on this unit with no audio or video input for a specified time,
this unit automatically enters the standby mode. Before it enters the standby mode, “Auto Standby” is
displayed on the display of this unit and the menu screen.
Setting details
60min : The unit goes into standby after 60 minutes.
30min : The unit goes into standby after 30 minutes.
Off : The unit does not go into standby automatically.
Front Display
Default settings are underlined.
Makes settings related to the display on this unit.
Setting items Setting details
Dimmer
Adjust the display
brightness of this unit.
Bright : Normal display brightness.
Dim : Reduced display brightness.
Dark : Very low display brightness.
Off : Turns the display off.
Buttons on the main unit can be used for operations.
Each time DIMMER is pressed, the setting is changed as shown
below.
Bright Dim
DarkOff
NOTE
When “Dimmer” is set to “Off”, the display turns off and appears as if
there is no electricity.
Channel Indicators
Sets whether to use the
input signal display or
output signal display for the
channel indication on the
display.
Input : Uses the input signal display for the channel indication on the
display.
Output : Uses the output signal display for the channel indication on the
display.
Information
Show information about receiver settings, input signals, etc.
NOTE
This item is not compatible with the HDMI ZONE4 function.
Items Setting details
Audio
Show information about
audio input signals.
Sound Mode : The currently set surround mode.
Input Signal : The input signal type.
Format : The number of input signal channels (presence of front, surround,
LFE).
Sample Rate : The input signal’s sampling frequency.
Offset : The dialogue normalization correction value.
Flag : This is displayed when inputting signals including a surround back
channel. “MATRIX” is displayed with Dolby Digital EX and DTS-ES Matrix
signals, “DISCRETE” with DTS-ES Discrete signals.
Dialogue normalization function
This function is automatically activated when playing Dolby Digital, Dolby
Digital Plus, Dolby TrueHD, DTS and DTS-HD sources.
It automatically corrects the standard signal level for individual program
sources.
The correction value can be checked using the
STATUS on the main unit.
Dial.Norm
Offset - 4dB
The figure is the corrected value. This cannot be changed.
Video
Show information about
HDMI input/output signals
and HDMI monitors.
HDMI Signal Info.
•Resolution / Color Space / Pixel Depth
HDMI Monitor 1 / HDMI Monitor 2
•Interface / Resolutions
General
Basic version
Advanced version
Informations
Advanced version
DVD