Filter
Top Products
114
Menu map
For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page.
By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences.
How to make detailed settings
Setting items Detailed items Description Page
Audio
Dialog Enhancer Adjusts and enhances the frequency band
corresponding to the human voice at the center
channel to make the voice clearer.
121
Subwoofer Level This setting adjusts the volume level for the
subwoofer.
121
Surround Parameter Adjusts surround sound parameters.
121
Tone Adjusts the tonal quality of the sound.
123
Restorer Expands the low and high frequency components
of compressed audio to enable richer audio
playback.
124
Audio Delay Compensates for incorrect timing between video
and audio.
124
Volume Set the MAIN ZONE (room where the unit is
located) volume setting.
124
Audyssey Makes Audyssey MultEQ
®
XT 32, Audyssey
Dynamic EQ
®
, Audyssey Dynamic Volume
®
,
Audyssey LFC™ and Audyssey DSX
®
settings.
125
Graphic EQ Uses the graphic equalizer to adjust the tone of
each speaker.
127
Video
Picture Adjust Adjusts the video quality.
129
HDMI Setup Makes settings for HDMI video/audio output.
129
Output Settings Makes screen-related settings.
131
Analog Video Out Assigns the zone that uses the VIDEO MONITOR
OUT connectors.
132
On Screen Display Select the on-screen display user interface
preferences.
133
TV Format Set the video signal format to be output for the
TV you are using.
133
Setting items Detailed items Description Page
Inputs
Input Assign Changes input connector assignment.
135
Source Rename Changes the display name for this source.
137
Hide Sources Remove from the display input sources that are
not used.
137
Source Level Adjusts the playback level of the audio input.
137
Input Select Sets the audio input mode and decode mode.
138
Video Source Video of another input source is played back
combined with the playing audio.
138
Speakers
Audyssey
®
Setup The acoustic characteristics of the connected
speakers and listening room are measured and
the optimum settings are made automatically.
33,99
Manual Setup Perform when setting the speakers manually
or when changing settings made in Audyssey
®
Setup.
141
Network
Information Display network information.
147
Network Enables network communication in standby
power mode.
147
Friendly Name The Friendly Name is the name of this unit
displayed on the network. You can change the
Friendly Name according to your preferences.
147
Settings Make settings for wired LAN.
148
Diagnostics Used to check the network connection.
149
Maintenance Mode Use when receiving maintenance from a DENON
service engineer or custom installer.
149
Basic version
Advanced version
Informations
Advanced version
v See overleaf
DVD