Filter
Top Products
94
Speaker connection
Normal connection
The diagram on the right shows a typical connection method.
Connect your speakers so that they correspond to the speaker names
indicated on the rear panel.
•If you connect the surround back, front height, and front wide
speakers before you start playback, the audio is played back by
automatically switching the speakers in accordance with the
surround mode or input signals.
•If using only one surround back speaker, connect to the “L” side
of the SURROUND BACK terminal. Also use the “Speaker Config.”
setting (vpage142) to set “Surr.Back” to “1spkr”.
For speaker settings in this case, see “When 6.1ch speakers are
installed” (vpage92).
NOTE
•For speaker cable connections, see page93.
•For speaker impedance , see page93.
n For connecting two subwoofers
Two subwoofers can be connected to this unit.
To use two subwoofers, set “Subwoofer” to “2 spkrs” using the
“Speaker Config.” setting (vpage142).
The level and distance can be set separately for Subwoofer 1 and
Subwoofer 2.
FL
FR
C
SL
SR
SW
FWR
FWL
FHRFHL
SBL SBR
Basic version
Advanced version
Informations
Advanced version
DVD