Filter
Top Products
140
Maximum number of channels that can be used for the MAIN ZONE audio.
9.1ch
(SB/FH/FW)
9.1ch/2ch
Front
7.1ch +
ZONE2
7.1ch
(Bi-Amp)
7.1ch +
ZONE2/3-
MONO
7.1ch +
Front B
7.1ch/2ch
Front
(Bi-Amp)
5.1ch +
ZONE2/3
5.1ch
(Bi-Amp) +
ZONE2
Discrete
11.1ch
Custom
Pre
Amplifier
S.Back/
F.Height
S.Back/
F.Height
S.Back/
F.Wide
S.Back/
F.Wide
F.Height/
FWide
F.Height/
FWide
Front
Front
Height
All Custom
“Assign Mode” Settings
Select the method for using a power amplifier in accordance with your speaker system.
“Main Speakers” Settings
Select the speaker terminal from which to
output the signals assigned to the power
amplifiers for MAIN ZONE.
“Main Speakers” Settings
Select the speaker terminal from which to
output the signals assigned to the power
amplifiers for MAIN ZONE.
“Main Pre-amps” Settings
Select a channel that uses the PRE OUT
connector.
“Pre-amp Assign” Settings
Select how to set the Channel used as PRE
OUT.
9.1ch
(5.1+SB+FH)
(5.1+SB+FW)
(5.1+FH+FW)
9.1ch
(5.1+SB+FH)
9.1ch
(5.1+SB+FW)
9.1ch
(5.1+FH+FW)
7.1ch
(5.1+SB)
(5.1+FH)
7.1ch
(5.1+SB)
(5.1+FW)
7.1ch
(5.1+FH)
(5.1+FW)
7.1ch
(5.1+SB)
5.1ch
11.1ch
(9.1 + Front
(PRE OUT))
11.1ch
(9.1 + Front Height
(PRE OUT))
11.1ch
(PRE OUT)
11.1 ch
Speakers
Steps for setting “Amp Assign”
This unit is provided with 12 types of Assign Mode settings.
You can switch the channels assigned to a power amplifier in accordance with your speaker system or perform playback using up to 11.1 channels using a combination of the built-in power amplifier and an external
power amplifier. You can also use this unit as a preamplifier.
Use the following flowchart to set the speaker system of this unit.
Basic version
Advanced version
Informations
Advanced version
DVD