Filter
Top Products
165
Operating macro function
•When the macro function is used, operations that usually require a
complicated series of multiple button operations can be performed
easily just by pressing the MACRO button.
•This device can remember up to 4 macro functions.
•Each macro can record a maximum of 18 steps.
[Example]
When the following set of operations has been registered to the
MACRO button, you can simply press the MACRO button to turn on
the TV and this unit and start playing back Blu-ray.
q Turn the TV’s power on
$
w Turn this unit’s power on
$
e Switch this unit’s input source to “Blu-ray”
$
r Turn the Blu-ray Disc player’s power on
$
t Play the Blu-ray Disc player
Recording automatic macro operations
You can automatically set the macro for your scene:
(1) Watch movies (MOVIE)
(2) Listen to music (MUSIC)
(3) Watch TV (CBL/SAT) (WATCH)
(4) Turn on all devices (ON)
(5) Turn off all devices (OFF)
NOTE
•Register preset codes for the remote control unit before setting
Auto macro (vpage157).
•Depending on the type or model of your device, macro may not work
properly even if it is set.
1
Press and hold RC SETUP for at
least 3 seconds.
“SETUP” and indicator flashes twice
on the remote control unit.
2
Use ui to display “MACRO” on
the remote control unit and press
ENTER.
3
Use ui to display “AUTO” on
the remote control unit and press
ENTER.
4
When “MCNo” appears on the
remote control unit, press the
MACRO A – D button that you
want to set.
5
Use ui to set the auto macro operation and press
ENTER.
“OK” flashes four times on the remote control unit and the
normal operation mode is restored.
Remote
control unit
display
Auto MACRO
MOVIE
Automatically turns on the devices and starts
playback when you watch movies.
TV power ON
Blu-ray power ON
AVR Power ON
Source Change Blu-ray
Playback Blu-ray
MUSIC
Automatically turns on the devices and starts
playback when you listen to music.
CD power ON
AVR Power ON
Source Change CD
Playback CD
WATCH
Automatically turns on the devices and starts
playback when you watch TV (CBL/SAT).
TV power ON
CBL/SAT Power ON
AVR Power ON
Source change CBL/SAT
ON
Turns on all the devices set for PRESET.
All DEVICE POWER ON
OFF
Turns off all the devices set for PRESET.
All DEVICE POWER OFF
Basic version
Advanced version
Informations
Advanced version
DVD