Filter
Top Products
43
NOTE
•Set the Blu-ray disc player’s “Denon Link” setting to “On”. For
instructions on operation, refer to the Blu-ray disc player’s manual.
•When a Blu-ray disc is played with the “Input Mode” (vpage138)
set to “Auto” or “HDMI”, playback is performed in the Denon Link
HD mode.
Playing Super Audio CD
The following describes the procedure for playing Super Audio CD.
1
Prepare for playback.
q Turn on the power of the subwoofer
and player.
w Load the disc in the player.
2
Press POWER X to turn on power
to the unit.
3
Perform the settings of the “Input Assign” menu
(vpage 135).
Assign HDMI connectors for the input source(example: DVD).
4
Press the input source select button (example: DVD)
to switch an input source assigned in step 3.
5
Set the audio input mode to “Auto” using the “Input
Mode” menu (vpage 138).
•The default setting of “Input Mode” is “Auto”.
6
Play the component connected to this unit.
The indicator lights on the display.
When playing back Super Audio CD, DSD signals are converted into
PCM signals which are then converted into analog signals.
Playing a CD player
The following describes the procedure for playing CD player.
1
Prepare for playback.
q Turn on the power of the subwoofer
and player.
w Load the disc in the player.
2
Press POWER X to turn on power
to the unit.
3
Press CD to switch the input
source to “CD”.
4
Play the CD player.
Playing a Blu-ray Disc player compatible with Denon Link HD
Basic version
Advanced version
Informations
Basic version
DVD