Mitsubishi Electronics MR-J3- B Car Amplifier User Manual


 
5 - 17
5. PARAMETERS
No. Symbol Name and function
Initial
value
Unit
Setting
range
PB34 VRF2B Gain changing vibration suppression control resonance frequency setting
This parameter cannot be used in the speed control mode.
Set the resonance frequency for vibration suppression control when the gain changing is
valid. This parameter is made valid when the parameter No.PB02 setting is "
2"
and the parameter No.PB26 setting is "
1".
When using the vibration suppression control gain changing, always execute the
changing after the servo motor has stopped.
100.0 Hz 0.1
to
100.0
PB35 0.00
PB36
For manufacturer setting
Do not change this value by any means.
0.00
PB37 100
PB38 0.0
PB39 0.0
PB40 0.0
PB41 1125
PB42 1125
PB43 0004h
PB44 0.0
PB45
0000h