Filter
Top Products
11 - 19
11. OPTIONS AND AUXILIARY EQUIPMENT
11.1.5 SSCNET
cable
POINT
Do not see directly the light generated from CN1A CN1B connector of servo
amplifier or the end of SSCNET
cable. When the light gets into eye, you
may feel something is wrong for eye. (The light source of SSCNET
complies
with class1 defined in JIS C6802 or IEC60825-1.)
(1) Model explanations
Numeral in the column of cable length on the table is a symbol put in the
part of cable model. Cables of
which symbol exists are available.
Cable length
Cable model
0.15m 0.3m 0.5m 1m 3m 5m 10m 20m 30m 40m 50m
Flex life
Application
remark
MR-J3BUS M 015 03 05 1 3 Standard
Using inside
panel standard
cord
MR-J3BUS M-A 5 10 20 Standard
Using outside
panel standard
cable
(Note)
MR-J3BUS
M-B
30 40 50
Long flex
life
Using long
distance cable
Note. For cable of 30m or less, contact our company.
(2) Specifications
Description
SSCNET cable model MR-J3BUS M MR-J3BUS M-A MR-J3BUS M-B
SSCNET cable length 0.15m 0.3 to 3m 5 to 20m 30 to 50m
Minimum bend radius 25mm
Enforced covering cord: 50mm
Cord: 25mm
Enforced covering cord: 50mm
Cord: 30mm
Tension strength 70N 140N
420N
(Enforced covering cord)
980N
(Enforced covering cord)
Temperature range
for use (Note)
-40 to 85
-20 to 70
Ambient
Indoors (no direct sunlight)
No solvent or oil
Optical
cable
(cord)
External appearance
[mm]
2.2 0.07
4.4 0.1
2.2 0.07
6.0 0.2
2.2 0.07
4.4 0.1
4.4 0.4
7.6 0.5
2.2 0.2
Note. This temperature range for use is the value for optical cable (cord) only. Temperature condition for the connector is the same as
that for servo amplifier.