Filter
Top Products
Print Data *Manual Number Revision
Jun, 2008 SH(NA)030051-D Section 3.2
Section 3.3.3 (1) (a)
Section 3.3.3 (2) (3)
Section 3.7.2 (2)
Section 3.10.2 (3) (a) 1) to
2)
Section 3.10.2 (3) (b)
Section 3.11.2
Section 4.1.2 (1) (c) 2) to
3)
Section 5.2.1
Section 7.4
Section 7.6.3
Section 7.6.4 (1) (a)
Section 7.6.4 (2) (a)
Section 10.1 (5) (6)
Section 10.3.1 (2)
Section 11.1
Section 11.1.1
Section 11.1.2 (2) (b)
Section 11.1.2 (3) (a)
Section 11.1.2 (4)
Section 11.1.2 (5)
Section 11.1.2 (5) (a)
Section 11.1.3 (2)
Section 11.1.4 (2)
Section 11.2 (1)
: Change of Note 15
: Change of CNP2 connector model from “54927-0520”
to “54928-0520”
: Switch between (2) and (3), Change of the description
for MR-J3-200B to the same as MR-J3-200B4
: Addition of description for the condition “Maximum
current: 50mA or less” to body paragraph
: Addition of NFB for fan power cable of servo motor’s
cooling fan, Change of description for Note 1
: Change of servo motor’s terminal diagram
: Change of timing chart
: Change of description for “D terminal” to “C terminal”
: Change of PB06 and PB29 unit for “times” to
“Multiplier(×1)”
: Change of description
: Change of PB06 and PB29 unit for “times” to
“Multiplier(×1)”
: Change of PB06 and PB29 unit for “times” to
“Multiplier(×1)”
: Change of PB06 and PB29 unit for “times” to
“Multiplier(×1)”
: Switch between (5) and (6), Change of the description
for MR-J3-200B to the same as MR-J3-200B4,
Addition of POINT to (5)
: Addition of dynamic brake characteristics of HA-SP,
HA-LP, HC-RP, HC-UP, and HC-LP
: Addition of POINT for protective structure
: Deletion of 2kW from Application, upper stand of 2) in
Table, Change of description for “2kW or less in 400V
class” to “2kW in 200V and 400V class”, Change of
corresponding model from “HF-SP121٠201” to “HF-
SP121 to 301” for 29) in Table, Change of
corresponding model for 30) in Table, Deletion of IP65
from Application, Change of corresponding model for
38) and 40) in Table, Deletion of IP67 from
Application, Deletion of IP67 from Application for 39)
in Table
: Correction of Note position for connecting diagrams
such as MR-EKCBL30M-H
: Addition of description “Crimping tool: 91529-1” in the
list of Junction Connector
: Change of corresponding model of “HF-SP” to “HF-
SP
HA-LP HC-RP HC-UP HC-LP”
: Addition of corresponding model of “HA-LP
HC-
RP
HC-UP HC-LP”
: Change of junction connector of “36110-3000PL” to
“36110-3000FD", Battery connector from “DF3-
EP2428PCFA” to “DF3-EP2428PCA”
: Addition of Note
: Addition of Note
: Change of built-in regenerative register value of MR-
J3-60B4
100B4 from “15” to “20”, Addition of Note 1