Filter
Top Products
Administrator’s Guide - SoundPoint
®
IP / SoundStation
®
IP Optimization
Copyright © 2006 Polycom, Inc. 101
In the following table, x is the chord-set number and cat is one of callProg, ringer, or
misc.
4.6.1.6 Sampled Audio for Sound Effects <sampled_audio/>
The following sampled audio WAVE file (.wav) formats are supported:
• mono 8 kHz G.711 μ-Law
• G.711 A-Law
• L16/16000
6
(16-bit, 16 kHz sampling rate, mono)
The phone uses built-in wave files for some sound effects. The built-in wave files can
be replaced with files downloaded from the boot server or from the Internet, however,
these are stored in volatile memory so the files will need to remain accessible should
the phone need to be rebooted. Files will be truncated to a maximum size of 300 kilo-
bytes.
Attribute
Permitted
Values
Interpretation
tone.chord.cat.x.freq.y 0-1600 Frequency for this component in Hertz; up to four
chord-set components can be specified (y=1, 2, 3,
4).
tone.chord.cat.x.level.y -57 to 3 Level of this component in dBm0.
tone.chord.cat.x.onDur positive
integer
On duration in milliseconds, 0=infinite.
tone.chord.cat.x.offDur positive
integer
Off duration in milliseconds, 0=infinite.
tone.chord.cat.x.repeat positive
integer
Specifies how many times the ON/OFF cadence
is repeated, 0=infinite.
6. L16/16000 is not supported on SoundPoint
®
IP 300, 301 and SoundStation
®
IP 4000 phones.