Filter
Top Products
Administrator’s Guide - SoundPoint
®
IP / SoundStation
®
IP Features
72 Copyright © 2006 Polycom, Inc.
11. Set the roaming_privacy.reg element to 1.
Refer to 4.6.2.9 Roaming Privacy <roaming_privacy/> on page 162.
12. Save the modified Per-Phone Configuration file.
Dual Registration with Microsoft
®
Office Live Communications Server 2005 as
the Presence Server
(Optional) Modify the sip.cfg configuration file as follows:
1. Open sip.cfg in an XML editor.
2. Locate the feature parameter.
3. For the feature.1.name = presence attribute, set feature.1.enabled to 1.
4. For the feature.2.name = messaging attribute, set feature.2.enabled to 1.
5. Locate the voIpProt parameter.
6. If SIP forking is desired, set voIpProt.SIP.ms-forking attribute
to 1. Refer to 4.6.1.1.4 SIP <SIP/> on page 88.
7. Save the modified SIP Configuration file.
Modify the phone1.cfg configuration file as follows:
1. Open phone1.cfg in an XML editor.
2. Locate the registration parameter.
3. Select a registration to be used for the Microsoft
®
Office Live Communica-
tions Server 2005.
Typically, this would be 2.
4. Set the reg.x.address to the LCS address.
For example, reg.2.address = "7778"
5. Set the reg.x.server.y.address to the LCS server name.
6. (Optional) Set the reg.2.server.y.transport attribute to TCPpreferred or TLS.
(Your selection depends on the LCS configuration.)
7. Set reg.x.auth.userId to the phone's LCS username.
For example, reg.2.auth.userId = "jbloggs"
8. Set reg.x.auth.password to the LCS password.
For example, reg.2.auth.password = "Password2"
9. Locate the roaming_buddies attribute.
10. Set the roaming_buddies.reg element to the number coresponding to the
LCS registration.
For example, roaming_buddies.reg = 2.
Refer to 4.6.2.8 Roaming Buddies <roaming_buddies/> on page 161.
11. Locate the roaming_privacy attribute.
12. Set the roaming_privacy.reg element to the number coresponding to the
LCS registration.
For example, roaming_privacy.reg = 2.
Refer to 4.6.2.9 Roaming Privacy <roaming_privacy/> on page 162.
13. Save the modified Per-Phone Configuration file.