Filter
Top Products
Administrator’s Guide - SoundPoint
®
IP / SoundStation
®
IP Optimization
Copyright © 2006 Polycom, Inc. 121
4.6.1.10 Basic TCP/IP <TCP_IP/>
4.6.1.10.1 Network Monitoring <netMon/>
4.6.1.10.2 Time Synchronization <SNTP/>
The following table describes the parameters used to set up time synchronization and
daylight savings time. The defaults shown will enable daylight savings time (DST) for
North America.
Daylight savings defaults:
• Do not use fixed day, use first or last day of week in the month.
• Start DST on the first Sunday in April at 2 am.
• Stop DST on the last Sunday in October at 2 am.
qos.ip.callControl.precedence 0-7 5 If set to 1, set precedence bits
in the IP TOS field of the IP
header, or else don’t set them.
Note
Polycom recommends that you do not change these values.
Attribute Permitted Values Default
tcpIpApp.netMon.enabled 0, 1 1
tcpIpApp.netMon.period 1 to 86400 30
Attribute
Permitted
Values
Default Interpretation
tcpIpApp.sntp.resyncPeriod positive
integer
86400
(24
hours)
Time in seconds
between Simple Net-
work Time Protocol
(SNTP) re-syncs.
tcpIpApp.sntp.address valid host
name or IP
address
clock Address of the SNTP
server.
Attribute
Permitted
Values
Default Interpretation