Filter
Top Products
Administrator’s Guide - SoundPoint IP / SoundStation
®
IP Optimization
152 Copyright © 2006 Polycom, Inc.
reg.x.callsPerLineKey 1 to 24 OR
1 to 8
24 OR
8
For the SoundPoint
®
IP 600 and 601
the permitted range is 1 to 24 and the
default is 24.
For all other phones the permitted
range is 1 to 8 and the default is 8.
This is the number of calls or confer-
ences which may be active or on hold
per line key associated with this regis-
tration.
Note that this overrides call.callsPer-
LineKey for this registration. Refer to
4.6.1.12 Call Handling Configuration
<call/> on page 125.
reg.x.outbound-
Proxy.address
dotted-decimal
IP address or
host name
Null IP address or host name and port of a
SIP server to which the phone shall
send all requests.
reg.x.outboundProxy.port 1 to 65535 5060
reg.x.outboundProxy.trans-
port
DNSnaptr or
TCPpreferred or
UDPonly or
TLS
DNSna
ptr
If set to Null or DNSnaptr:
If reg.x.outboundProxy.address is a
hostname and reg.x.outbound-
Proxy.port is 0 or Null, do NAPTR then
SRV look-ups to try to discover the
transport, ports and servers, as per RFC
3263. If reg.x.outboundProxy.address
is an IP address, or a port is given, then
UDP is used.
If set to TCPpreferred:
TCP is the preferred transport, UDP is
used if TCP fails.
If set to UDPonly:
Only UDP will be used.
If set to TLS:
If TLS fails, transport fails. Leave port
field empty (will default to 5061) or set
to 5061.
Note: TLS is not supported on Sound-
Point
®
IP 300 and 500 phones.
reg.x.proxyRequire string Null The string that needs to appear in the
“Proxy-Require” header. If Null, no
"Proxy-Require" will be sent.
Attribute
Permitted
Values
Default Interpretation