Polycom 1725-11530-200 Rev A1 Car Speaker User Manual


 
Administrator’s Guide - SoundPoint
®
IP / SoundStation
®
IP Installation and Operation
22 Copyright © 2006 Polycom, Inc.
2.2.2.2 Local Phone Configuration
As the only method of modifying phone configuration or as a distributed method of
augmenting a centralized provisioning model, a local phone-based configuration web
server is available, unless it is disabled through sip.cfg. For more information, refer to
4.6.1.11 Web Server <HTTPD/> on page 125. The phone’s local user interface also
permits many application settings to be modified, such as SIP server address, ring
type, or regional settings such as time/date format and language.
6. Reboot phones after configuring their
boot server through DHCP or statically.
Refer to 2.2.1 Basic Network Setup on page 5.
To reboot phones, a menu option can be selected or a
key combination can be held down. The menu option
is called Restart Phone and it is in the Settings menu.
For the key combination, press and hold the following
keys simultaneously until a confirmation tone is heard
or for about three seconds:
IP 300 & IP 301: Volume-, Volume+, Hold and Do
Not Disturb
IP 430, 500 & IP 501: Volume-, Volume+, Hold, and
Messages
IP 600 & IP 601: Volume-, Volume+, Mute, and Mes-
sages
IP 4000: *, #, Volume+, and Select
Monitor the boot server event log and the uploaded
event log files (if permitted):
Ensure that the configuration process completed cor-
rectly.
Start making calls.
a. If the provisioning protocol requires an account name and password, the server account
name and password must match those configured in the phones. Defaults are: provisioning
protocol: FTP, name: PlcmSpIp, password: PlcmSpIp
Local Web Server Access Point your web browser to http://<phoneIPAddress>/.
Configuration pages are accessible from the menu along the top ban-
ner.
The web server will issue an authentication challenge to all pages
except for the home page.
Credentials are (case sensitive):
User Name: Polycom
Password: The administrator password is used for this.
Step: Instructions: