Filter
Top Products
Administrator’s Guide - SoundPoint IP / SoundStation
®
IP Optimization
158 Copyright © 2006 Polycom, Inc.
4.6.2.4.2 Routing <routing/>
This configuration section allows specific routing paths for outgoing SIP calls to be
configured independent of other ‘default’ configuration.
4.6.2.4.2.1 Server <server/>
4.6.2.4.2.2 Emergency <emergency/>
In the following attributes, y is the index of the emergency entry description and z is
the index of the server associated with the emergency entry y. For each emergency
entry (index y), one or more server entry (indexes (y,z)) can be configured. y and z
must both follow single step increasing numbering starting at 1.
Attribute Permitted Values Default Interpretation
dialplan.x.rout-
ing.server.y.address
dotted-decimal IP
address or host name
Null IP address or host name
and port of a SIP server
that will be used for
routing calls. Multiple
servers can be listed
starting with y=1, 2, ...
for fault tolerance.
dialplan.x.rout-
ing.server.y.port
1 to 65535 5060
Attribute Permitted Values Default Interpretation
dialplan.x.routing.emer-
gency.y.value
Comma separated list
of entries or single
entry representing a or
a combination of SIP
URL.
Null
Example:
“15,17,18”,
“911”, “sos”.
This represents the
URLs that should be
watched for emergency
routing.
When one of these
defined URL is detected
as being dialed by the
user, the call will be
automatically directed to
the defined emergency
server.
dialplan.x.routing.emer-
gency.y.server.z
positive integer Null Index representing the
server defined in
4.6.2.4.2.1 Server
<server/> on page 158
that will be used for
emergency routing.