Filter
Top Products
Administrator’s Guide - SoundPoint
®
IP / SoundStation
®
IP Features
Copyright © 2006 Polycom, Inc. 41
configuration syntax is the same as that specified in 2.1.5 of RFC 3435. The phone
behavior when the user dials digits that do not match the digit map is configurable. It is
also possible to strip a trailing # from the digits sent.
3.1.19 Microphone Mute
A microphone mute feature is provided. When activated, visual feedback is provided.
This is a local function and cannot be overridden by the network.
3.1.20 Multiple Line Keys per Registration
More than one line key can be allocated to a single registration (phone number or line).
The number of line keys allocated per registration is configurable.
Central
(boot
server)
Configuration file:
sip.cfg
Specify impossible match behavior, trailing # behavior,
digit map matching strings, and time out value.
• For more information, refer to 4.6.1.2 Dial Plan
<dialplan/> on page 94.
Configuration file:
phone1.cfg
Specify per-registration impossible match behavior,
trailing # behavior, digit map matching strings, and time
out values that override those in sip.cfg.
• For more information, refer to 4.6.2.4 Dial Plan
<dialplan/> on page 156.
Local
Web Server
(if enabled)
Specify impossible match behavior, trailing # behavior,
digit map matching strings, and time out value.
Navigate to: http://<phoneIPAddress>/appConf.htm#ls
Changes are saved to local flash and backed up to
<Ethernet address>-phone.cfg on the boot server.
Changes will permanently override global settings unless
deleted through the Reset Local Config menu selection.
Local Phone User
Interface
None.
Central
(boot
server)
Configuration file:
phone1.cfg
Specify the number of line keys to assign per registration.
• For more information, refer to 4.6.2.1 Registration
<reg/> on page 149.