Filter
Top Products
Administrator’s Guide - SoundPoint
®
IP / SoundStation
®
IP Installation and Operation
Copyright © 2006 Polycom, Inc. 23
Changes made through the web server or local user interface are stored internally as
overrides. These overrides take precedence over settings contained in the configura-
tion obtained from the boot server.
If the boot server permits uploads, these override setting will be saved in a file called
<Ethernet address>-phone.cfg on the boot server as well in flash memory.
2.2.3 Management of File Encryption and Decryption
The phone can recognize encrypted files, which it downloads from the boot server and
it can encrypt files before uploading them to the boot server. There must be an encryp-
tion key on the phone to perform these operations. Configuration files (excluding the
master configuration file), contact directories and configuration override files can be
encrypted.
A separate SDK, with a readme file, is provided to facilitate key generation and con-
figuration file encryption and decrypt on a UNIX or Linux server. The utility is distrib-
uted as source code that runs under the UNIX operating system. A key is generated by
the utility and must be downloaded to the phone so that it can decrypt the files that
were encrypted on the server. The device.sec.configEncryption.key configuration file
parameter is used to set the key on the phone. The utility generates a random key and
Local Settings Menu Access Some items in the Settings menu are locked to prevent accidental
changes. To unlock these menus, enter the user or administrator
passwords.
The administrator password can be used anywhere that the user pass-
word is used.
Factory default passwords are:
• User password: 123
• Administrator password: 456
Passwords:
Administrator password
required.
Network Configuration
SIP Configuration
SSL Security settings
Reset to Default - local configuration, device settings, and file sys-
tem format
User password required. Restart Phone
Important
Local configuration changes will continue to override the boot server-derived configuration until
deleted through the Reset Local Config menu selection.