Filter
Top Products
Administrator’s Guide - SoundPoint
®
IP / SoundStation
®
IP Features
50 Copyright © 2006 Polycom, Inc.
until a successful SNTP response is received to indicate that they are not accurate. The
time and date display can use one of several different formats and can be turned off.
Central
(boot
server)
Configuration file:
sip.cfg
Turn time and date display on or off.
• For more information, refer to 4.6.1.4 User Prefer-
ences <user_preferences/> on page 98.
Set the time and date display formats.
• For more information, refer to 4.6.1.3.2 Date and
Time <datetime/> on page 97.
Set the basic SNTP settings and daylight savings param-
eters.
• For more information, refer to 4.6.1.10.2 Time Syn-
chronization <SNTP/> on page 121.
Local
Web Server
(if enabled)
Set the basic SNTP and daylight savings settings.
Navigate to: http://<phoneIPAddress>/coreConf.htm#ti
Changes are saved to local flash and backed up to
<Ethernet address>-phone.cfg on the boot server. They
will permanently override global settings unless deleted
through the Reset Local Config menu selection.
Local Phone User
Interface
The basic SNTP settings can be made in the Network
Configuration menu.
• For more information, refer to 2.2.1.1 DHCP or
Manual TCP/IP Setup on page 5.
The user can edit the time and date format and enable or
disable the time and date display under the Settings
menu.
Changes are saved to local flash and backed up to
<Ethernet address>-phone.cfg on the boot server. They
will permanently override global settings unless deleted
through the Reset Local Config menu selection.