Filter
Top Products
Administrator’s Guide - SoundPoint
®
IP / SoundStation
®
IP Features
Copyright © 2006 Polycom, Inc. 65
600 and 601). A message-waiting signal from a voice mail server will trigger the mes-
sage-waiting indicator to flash.
Central
(boot
server)
Configuration file:
sip.cfg
For one-touch voice mail access, enable the “one-touch
voice mail” user preference.
• For more information, refer to 4.6.1.4 User Preferences
<user_preferences/> on page 98.
Configuration file:
phone1.cfg
For one-touch voice mail access, choose to bypass instant
messages to remove the step of selecting between instant
messages and voice mail after pressing the Messages key on
the SoundPoint
®
IP 500, 501, 600 and 601 (instant mes-
sages are still accessible from the Main Menu).
On a per-registration basis, specify a subscribe contact for
solicited NOTIFY applications, a callback mode (self call-
back or another contact), and the contact to call when the
user accesses voice mail.
• For more information, refer to 4.6.2.5 Messaging <msg/
> on page 159.
Local
Web Server
(if enabled)
For one-touch voice mail access, enable the “one-touch
voice mail” user preference and choose to bypass instant
messages to remove the step of selecting between instant
messages and voice mail after pressing the Messages key on
the SoundPoint
®
IP 500, 501, 600 and 601 (instant mes-
sages are still accessible from the Main Menu).
Navigate to: http://<phoneIPAddress>/coreConf.htm#us
On a per-registration basis, specify a subscribe contact for
solicited NOTIFY applications, a callback mode (self call-
back or another contact) to call when the user accesses voice
mail.
Navigate to: http://<phoneIPAddress>/reg.htm
Changes are saved to local flash and backed up to <Ethernet
address>-phone.cfg on the boot server. These changes will
permanently override global settings unless deleted through
the Reset Local Config menu selection.
Local Phone User
Interface
None.