Filter
Top Products
Administrator’s Guide - SoundPoint IP / SoundStation
®
IP Optimization
84 Copyright © 2006 Polycom, Inc.
4.6 Configuration Files
This section is a reference for all parameters that are configurable when using the cen-
tralized provisioning installation model. It is divided into two sections:
• Application Configuration - sip.cfg
• Per-phone Configuration - phone1.cfg
Note
In the following tables, “Null” should be interpreted as the empty string, that is, attributeName=“”
when the file is viewed in a text editor.
To enter special characters in a configuration file, enter the appropriate sequence using a text editor.
Refer to the following table.
4.6.1 SIP Configuration - sip.cfg
The configuration file sip.cfg contains SIP protocol and core configuration settings
that would typically apply to an entire installation and must be set before the phones
will be operational, unless changed through the local web server interface or local
menu settings on the phone. Settings include the local port used for SIP signaling, the
address and ports of a cluster of SIP servers, and other parameters. The following sec-
tions describe each of these parameters.
For more information, refer to 2.2.2.1.1 Configuration Files on page 13 and 2.2.2.2
Local Phone Configuration on page 22.
Special Character Required Character Sequence in Text Editor
&&
” "
’ '
<<
>>
Important
The order of the configuration files listed in CONFIG_FILES is significant.
• The files are processed in the order listed (left to right).
• The same parameters may be included in more than one file.
The parameter found first in the list of files will be the one that is effective.