Filter
Top Products
Chapter 5: Configuration
Certificate Assignment
90 Psion Teklogix 8515 Vehicle-Mount Computer User Manual
Trigger Type
You can enable either an Up/Down or Double Click response to a trigger press. Normally,
when a trigger (keyboard key, etc.) is pressed and released, a “trigger down” event is sent to
the “owner”—that is, the application receiving the trigger press information followed by a
“trigger up”. If Double Click is chosen in this menu, when the trigger is pressed, released,
and then pressed again, a “double-click” event is generated. If a mapping with the type
Up/down has also been configured for the same source, it will only receive the first set of
trigger events.
Trigger Owner
This identifies the driver or application receiving the trigger presses.
Show All
By default, inactive owners are not shown. By checking this checkbox, all owners, both
active and inactive, are displayed.
5.11 Certificate Assignment
•In the Control Panel, choose the Certificates icon.
Figure 5.31 Certificates Icon
This dialog box is used in conjunction with 802.1X authentication to enhance 8515 security.