Filter
Top Products
5-27
Chapter 5, FRONT PANEL OPERATION
X %fs
Figure 5-27, X Output as % Full-Scale
Shows the X output as a percentage of the selected full-scale sensitivity setting.
Hence if the sensitivity setting were 100 mV and a 50 mV signal were applied, with
the instrument’s reference phase adjusted for maximum X output, the display would
read 50.00 %
Y %fs
Figure 5-28, Y Output as % Full-Scale
Shows the Y output as a percentage of the selected full-scale sensitivity setting.
Hence if the sensitivity setting were 100 mV and a 50 mV signal were applied, with
the instrument’s reference phase adjusted for maximum Y output, the display would
read 50.00 %