Filter
Top Products
5 - 5
5. PARAMETERS
Class No. Symbol Name and Function
Initial
Value
Unit
Setting
Range
Control
Mode
2 ATU Auto tuning:
Used to set the response level, etc. for execution of auto tuning.
Auto tuning response level
setting
0
If the macine hunts or generates
large gear sound, decrease the
set value.
To improve performance, e.g.
shorten the settling time, increase
the set value.
Set Value Response Level
1
2
3
4
5
Low response
Middle response
High response
⋅
⋅
Select the machine.
For example, used to improve the
position setting characteristic
when friction is large.
0: Ordinary machine
1: Machine with large friction
Auto tuning selection
0: Auto tuning selected for use of interpolation
axis control, etc. in position control
1: Auto tuning for ordinary operation
2: No auto tuning
0104 0001h
to
0215h
P x S
3 CMX Electronic gear numerator:
Used to set the electronic gear numerator value.
For the setting, refer to Section 5.2.1.
Setting "0" automatically sets the resolution of the servo motor
connected.
11
to
32767
P
Basic parameters
4 CDV Electronic gear denominator:
Used to set the electronic gear denominator value.
For the setting, refer to Section 5.2.1.
11
to
32767
P